Small Service
BASIC MAINTENANCE – SERVICE AFTER 2.000 HOURS OF OPERATION
Content of the maintenance intervention:
- inspection of the machine according to the protocol of the regular service inspection of the machine
- visual inspection of the machine
- checking the safety circuits of the machine
- inspection of energy distribution: electricity, hydraulics, pneumatics, cooling and lubrication
- checking/cleaning the cooling device for temperature stabilization of the spindle and checking the settings
- check/adjustment of flow monitoring in the temperature stabilization circuit of the spindle
- check of noise and spindle load in the entire speed range
- spindle lubrication check – adjustment of output pressures from the lubrication cube (according to the type of spindle used)
- check/adjustment of spindle clamping rod exit to spindle face (EM value)
- checking the tightening of the inner screw in the collet
- checking the clamping force and hydraulic pressure for the spindle clamp
- inspection and calibration of the workpiece probe
- instrument probe inspection and calibration
- checking the active temperature stabilization of the machine (according to the machine configuration)
- preparation of a protocol of recommended measures/interventions
Exchange of filter inserts and service fluids:
- exchange of pneumatic filters
- exchange of hydraulic filter
- exchange of filter for spindle lubrication
- exchange of filters in the electrical cabinet
- exchange of main spindle cooling filter
- checking / exchange of hydraulic oil
- checking / exchange of the cooling circuits
- checking of service life of spindle rotation unit
Time duration: 1 working day